Hey Dave I still have 4 gallon tin left over
It can be tinted using industrial tints cost about $30
It is grey from the navy battleships . $70 is what it cost me
Im in Baldivis if you want to have a look I am buffing it this weekend
your more then welcome
cheers Shane
Hey Shane, where are those pictures ?
And did it only take a gallon for the whole kombi ?
And how many coats and cuts ?
What was your technique and did you flash it with "white spirit" ?
We are hungry for the details. _________________ don't start the revolution without me !
Hey Dave I still have 4 gallon tin left over
It can be tinted using industrial tints cost about $30
It is grey from the navy battleships . $70 is what it cost me
Im in Baldivis if you want to have a look I am buffing it this weekend
your more then welcome
cheers Shane
I guess industrial tints would be similar to agricultural paint tints.
Have to talk to someone who knows formula from grey to Light or Bright orange.
----------------------- _________________ Kombis Keep you Younger
Firstly Cheers Brookie for hooking the photos up
Ok Pete , It only took 2ltrs all up for the grey with a 3 to 1 ratio
Flashed with white spirits
no sanding in between coats ( too lazy for that )
I found that you apply a coat with one roller then give it 10-15 mins
Depending on temp , This leaves little bubbles in which you Then roll over this with another roller with minimal paint on it . This got rid off the bubbles so no need for sanding between coats .
The finished photos are before buffing so we should get
an even better shine
Its easy to do , just watch out for bugs at night , Thers a few under the paint now
Hey Dave I still have 4 gallon tin left over
It can be tinted using industrial tints cost about $30
It is grey from the navy battleships . $70 is what it cost me
Im in Baldivis if you want to have a look I am buffing it this weekend
your more then welcome
cheers Shane
that would be good to come and have a look , i was going to use rust kill ?? dont know if that would be anygood but have tryed it on a door looks ok , but i might have the paint off you , i will see if wife likes the colour lol , i live in the north just got to look where baldivis is , can you pm you address thanks
Dave _________________ mother earth is the true artist
Hey Dave I still have 4 gallon tin left over
It can be tinted using industrial tints cost about $30
It is grey from the navy battleships . $70 is what it cost me
Im in Baldivis if you want to have a look I am buffing it this weekend
your more then welcome
cheers Shane
that would be good to come and have a look , i was going to use rust kill ?? dont know if that would be anygood but have tryed it on a door looks ok , but i might have the paint off you , i will see if wife likes the colour lol , i live in the north just got to look where baldivis is , can you pm you address thanks
Dave
Hi mate. I intend on roller painting my bus next week, can you tell me more about 'Rust Kill'.
Howdy Graham
I think rust kill would do the job , I think thinning it down
3 parts paint one part white spirits would help it dry quicker and give you
a better finish .. Try it out
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
FAQ
Search
Memberlist
Usergroups
Join! (free) 
Profile
Log in to check your private messages
Log in
